Z45X Cast Iron Flange Gate Valve

Cast Iron Gate Valve Materials

Body	GG20 GG25	Bolt	GS-C25
Seat Ring	Brass,Bronze	Gland	GG20 GG25
Wedge Ring	Brass	Washer	GS-C25
Wedge	GG20 GG25	Nut	GS-C25
Bolt	GS-C25	Bonnet	GG20 GG25
Nut	GS-C25	Yoke Nut	Brass
Washer	GS-C25	Nut	GS-C25
Bonnet Gasket	Graphite	Handwheel	GG25
Packing	Graphite	Stem	X10Cr13

Cast Iron Flange Gate Valve
Bolted Bonnet: Outside Screw & Yoke
Rising Stem:Solid Wedge
Design Standard: BS5163
Face to Face: BS5163

Application JIS Cast Iron Flange Gate Valve
Working Temp: 100 °C
Working Pressure: 10k
Suitable Medium: Water, Steam, Oil, ect.
Not recommended for Steam Service.
Caution: freezing weather Precaution - Subsequent to testing a piping system, Rising Stem Gate Valve should be left in an open position to allow complete drainage.

Application
1 Design According to ANSI B16.1 Class 125/Class 150
2 Flange End Face to ANSI B16.1 Class 125/Class 150
3 For water, neutral liquids and oil, gas

Specification JIS Cast Iron Flange Gate Valve
Bolted Bonnet: Outside Screw & Yoke
Rising Stem:Solid Wedge
Design Standard: JIS B2044
Face to Face: JIS B2002
Main Dimensions JIS10K

Norminal diameter(mm)		Length	Diameter of flange	Distance of holes	Heitht
2"	50	177.80	152	120.7	375
2 1/2"	65	190.50	178	139.5	408
3"	80	203.20	190	152.5	442
4"	100	228.60	229	190.5	545
5"	125	254.00	254	216	656
6"	150	266.70	279	241.5	770
8"	200	292.10	343	298.5	959
10"	250	330.20	406	362	1255
12"	300	355.60	483	432	1443

Main Dimensions 150LB

Norminal diameter(mm)		Length	Diameter of flange	Distance of holes	Heitht
2"	50	155	120	178	330
2 1/2"	65	175	140	190	385
3"	80	185	150	203	420
4"	100	210	175	229	500
5"	125	250	210	254	660
6"	150	280	240	267	740
8"	200	330	290	292	930
10"	250	400	355	330	1130
12"	300	445	400	356	1330

Statement: this information is just for reference, for detailed information, please contact us.