Y-type Female Strainer

Y-type Female Strainer
 (With end cap plug)
SY11-(16-64) C, P, R
Features:
Nominal pressure: PN1.6, 2.5, 4.0, 6.4MPa
Strength testing pressure: PT2.4, 3.8, 6.0, 9.6Mpa
Applicable medium: SY11-(16-64) C Water, Oil, Gas
SY11-(16-64) P Nitric acid SY11-(16-64) R Acetic acid
Applicable temperature:-40~180℃
(WCB, CF8, CF8M)
Materials of main parts

Description Of Parts	SY11-(16-64)C	SY11-(16-64)P	SY11-(16-64)R
Body	WCB	ZG1Cr18Ni9Ti	ZG1Cr18Ni12Mo2Ti
		CF8	CF8M
Bonnet	WCB	ZG1Cr18Ni9Ti	ZG1Cr18Ni12Mo2Ti
		CF8	CF8M
Mesh	ICr18Ni9Ti 304	1Cr18Ni9Ti 304	1Cr18Ni12Mo2Ti 316
Gasket	Polytetrafluorethylene(PTFE)

Main outer size

DN	G	L	E	B	H
8	1/4"	64	12	24	44
10	3/8"	64	12	24	44
15	1/2"	64	14	26	44
20	3/4"	75	15	32	52
25	1"	89	17	41	64
32	11/4"	102	20	49	68
40	11/2"	118	20	56	76
50	2"	139	22	69	88

Stainless steel standards of different countries

GB	EN	AISl	ASTM	BSl	DlN	JIS
(Chlna)	(Europa)	(U.S.A)	(U.S.A)	(U.K)	(Germany)	(Japan)
0Cr18Ni9	X5CrNi18-10	304	TP304	304 S 15	1.4301	SUS304
				304 S 16
00Cr19NilO	X2 CrNil9-11	304L	TP304L	304 S 11	1.4306	SUS304L
0Cr17Ni12M02	X5CrNiMo17-2-2	316	TP316	316 S 31	1.4401	SUS316
00Cr17Ni14M02	X2CrNiMo17-2-2	316L	TP316L	316 S 11	1.4404	SUS316L

Chemical composition and mechanics property

(GB)	Materials	C	Si	Mn	P	S	Cr	Mo	Ni	σ.2(Mpa)≥	σb(Mpa)≥	δ5 %	HB≤
	304	0.07	1.0	2.0	0.035	0.030	17.0-19.0	/	8.0-11	205	520	40	187
	304L	0.03	1.0	2.0	0.035	0.030	18.0-20.0	/	8.0-12	177	480	40	187
	316	0.08	1.0	2.0	0.035	0.030	16.0-18.5	2.0-3.0	10-14	205	520	40	187
	316L	0.03	1.0	2.0	0.035	0.030	16.0-18.0	2.0-3.0	12-15	177	480	40	187
	Materials	C	Si	Mn	P	S	Cr	Mo	Ni	σ.2(Mpa)≥	σb(Mpa)≥	δ5 %	HB≤
	TP304	0.08	0.75	2.0	0.040	0.030	18.0-20.0	/	8.0-11	205	515	35	187
	TP304L	0.035	0.75	2.0	0.040	0.030	18.0-20.0	/	8.0-13	170	485	35	187
	TP316	0.08	0.75	2.0	0.040	0.030	16.0-18.0	2.0-2.5	10-14	205	515	35	187
	TP316L	0.035	0.75	2.0	0.040	0.030	16.0-18.0	2.0-2.5	12-15	170	485	35	187
(JIS)	Materials	C	Si	Mn	P	S	Cr	Mo	Ni	σ.2(Mpa)≥	σb(Mpa)≥	δ5 %	HB≤
	304	0.08	1.0	2.0	0.040	0.030	18.0-20.0	/	8.0-11	206	520	35	187
	304L	0.03	1.0	2.0	0.040	0.030	18.0-20.0	/	9.0-13	177	481	35	187
	316	0.08	1.0	2.0	0.040	0.030	16.0-18.0	2.0-3.0	10-14	206	520	35	187
	316L	0.03	1.0	2.0	0.040	0.030	16.0-18.0	2.0-3.0	12-16	177	481	35	187
(BSI) (DIN) (EN)	Materials	C	Si	Mn	P	S	Cr	Mo	Ni	σ.2(Mpa)≥	σb(Mpa)≥	δ5 %	HB≤
	304	0.07	1.0	2.0	0.045	0.015	17.0-18.0	/	8.0-10	205	520	40	187
	304L	0.03	1.0	2.0	0.045	0.015	17.0-18.0	/	8.0-10	180	480	40	187
	316	0.08	1.0	2.0	0.045	0.015	16.5-18.0	2.0-2.5	10-13	205	520	40	187
	316L	0.03	1.0	2.0	0.045	0.015	16.5-18.0	2.0-2.5	10-13	180	480	40	187

Statement: this information is just for reference, for detailed information, please contact us.